BLACKLINE® GHOST FOAM CANNON
✔ Thick, consistent foam that clings
✔ 90° locking hex canister, no threads
✔ Stream-to-fan + vertical or horizontal foam
✔ Built-in dilution markings + anti-slip base
Our most premium foam cannon yet.
The GHOST lays down thick, consistent foam and gives you full control over how it hits the paint. Twist the nozzle from a tight stream to a wide fan, rotate it to spray vertically or horizontally, and lock the custom 1000 mL hex canister on with a quick 90° turn. Built-in dilution markings make every mix repeatable, and the brass core and 1/4" quick connect are built to last.
2 Drying Towels + 6 Free Gifts
x2Drying Towel
You pick
x3Reset Cleaner
Free
x3Everyday Microfiber
Free
Stream-to-Fan Nozzle
Twist from a concentrated stream to a wide fan, then rotate it to lay foam vertically, horizontally, or anywhere in between.
Brass Core + 1/4" Quick Connect
Brass internal and connection parts snap onto any pressure washer with a 1/4" quick connect. 1.1 mm orifice installed, 1.2 mm orifice included.
90° Locking Canister
No more spinning threads. Set the head on and give it a quarter turn to lock it in place.
1000 mL Hex Canister
Tinted-clear canister with built-in dilution markings and an anti-slip base that stays planted while you fill.
EXPERIENCE HIGH PERFORMANCE FOAM
Premium By Design
The GHOST is Blackline's flagship foam cannon: brass internal and connection components, a custom hex-style 1000 mL canister and a premium black-and-gray build made to match the rest of your Blackline kit.
Stream to Fan, Any Angle
Twist the front nozzle from a concentrated stream for wheels and lower panels to a wide fan for full-body coverage, then rotate it to spray vertically, horizontally, or anywhere in between. For best results, pair it with Blackline Ultra Foam.
Faster, Easier Setup
The 90° locking canister goes on and comes off with a quarter turn, the built-in dilution markings take the guesswork out of every mix, and the anti-slip base keeps it steady while you fill.
The GHOST is Blackline's flagship foam cannon: brass internal and connection components, a custom hex-style 1000 mL canister and a premium black-and-gray build made to match the rest of your Blackline kit.
Twist the front nozzle from a concentrated stream for wheels and lower panels to a wide fan for full-body coverage, then rotate it to spray vertically, horizontally, or anywhere in between. For best results, pair it with Blackline Ultra Foam.
The 90° locking canister goes on and comes off with a quarter turn, the built-in dilution markings take the guesswork out of every mix, and the anti-slip base keeps it steady while you fill.
How-to-use
Follow the steps to get the best results from your Foam Cannon GHOST
Add soap using the dilution markings on the canister, then top it off with water.
Set the head on the canister and twist 90° to lock it, then snap it onto your pressure washer's 1/4" quick connect.
Twist the nozzle from stream to wide fan and rotate it for vertical or horizontal foam.
Coat the whole vehicle, let it dwell, then rinse thoroughly.
FAQs
Quick answers from the Blackline team.
It depends on the soap you're using, so follow its label. The GHOST canister has dilution markings built into the side, so you can measure soap and water right in the bottle and repeat the same mix every wash.
With Blackline Ultra Foam, 2-4 oz topped off with water lays down a thick blanket of foam.
Any pressure washer with a 1/4" quick-connect fitting. We recommend about 800 PSI or higher. The GHOST is not designed to run off a garden hose on its own.
The GHOST comes with a 1.1 mm orifice installed and a 1.2 mm orifice in the box. Start with the installed 1.1 mm. If you run a higher-flow pressure washer, swap in the 1.2 mm.
Add your soap using the dilution markings and top off the canister with water. Set the head on the canister and twist 90° to lock it, then connect it to your pressure washer with the 1/4" quick connect. Twist the nozzle to set your spray from stream to wide fan, rotate it for vertical or horizontal foam, and foam away.
- Rinse after each use: run clean water through the cannon and rinse the canister so soap doesn't dry inside the nozzle or internal parts.
- Clean regularly: wash the canister and head with warm water and a mild soap, and use a soft brush on any built-up residue.
- Keep the nozzle clear: if foam output drops, check the nozzle and orifice for blockages and clear them carefully.
- Use compatible chemicals only: avoid solvents or harsh chemicals that can damage the seals, internal parts or the PET canister.
- Store it dry: let everything dry completely before storing it in a clean, dry place.
FOAM CANNON GHOST
Most foam cannons use a generic round bottle and a multi-turn threaded connection. The GHOST was built from the ground up instead: a custom hex-style canister that locks on with a 90° turn, a tinted-clear body with dilution markings you can read at a glance, and an anti-slip base for stable fills. Up front, the adjustable nozzle goes from stream to wide fan and rotates for vertical or horizontal foam, so every panel gets exactly the coverage it needs.
Why others
choose Blackline
Supported by over 1 million amazing customers
